Technomate control center loader program

If you don't like what I post, Don't read it. Sponsored by World-of-Satellite. DCC-E2 v1. To use this function must be the plugin "dFlash" of gutemine be installed on the box! The backup image is always created first on the box the target directory and can optionally be downloaded to the PC. Upon request, then the backup on the box is cleared. The path for the backup on the box and will download to a PC and stored in the configuration are set automatically the next time.

In addition to the previously selected entry will now jump back, if after you install or remove a plugin, the table is re-read. Reloading is necessary in any case, since DCC can not even detect whether dependent packages have been installed. You can find these strings in the language file in the [strings] and start with 'menu The setting is saved and automatically restored after restart.

Support, version 6. Previous versions are still supported. This task is no text-based changes in the resources, why should all language files of the previous version continue to be used.

For best results always install Iboot on an original image in flash To begin click the settings button top left and fill in the connection details for your Technomate including ip address, user name, password and a name for this connection such as TM Once configured you need to insert an sd card into your receivers card slot.

The bigger the better as this will allow you to experiment with more images, but I think 2gig is the max size you can use. Watch the window and after the task has completed it should say that the mmc or if you selected it, the hdd has been mounted ok. Only select to format the memory card if this is a new installation or you want to clear the card. If you are re-installing Iboot because you have changed your flash image and want to keep all the images you had in mmc, do NOT format it.

Now proceed to install iboot by clicking the install iboot button, Note that the section middle right to do with swap file is greyed out at this time, we will come back to that. Watch the window and the box as it begins to load files checking for any errors.

You will need to ask for help on our forums at tm When completed you will see this. Once the software has been successfully installed return back to the Main screen by closing this window. Now press the "Install Iboot on Box" button again to configure the Swap file.

Some images require a swap file on an sd card to use as a scratch pad or just to store extra information like the EPG files. The bigger the swap file the better. When you have selected either the Hdd or Memory card for the swap file and the size of the swap file, a new button will appear bottom right just for configuring the swap file, press that and wait for it to complete, it can take some time. On completion return to the main screen and choose "Install firmware.

After a successful install restart your receiver, choose one of your installed image names from the green menu that appears after the splash screen and play with your new firmware image. The process above is almost identical when installing iboot onto a hard disk. See the tm Author - Wedgehog Images courtesy of Wedgehog. Tm Changing Passwords It is vital that with any image that you should change from the default password to one that only you know.

Once downloaded extract to your PC and then run the program file. Basically, you will not enjoy watching movies if your media player keeps on buffering. One more thing, it is true that they have more than a thousand of channels available but unfortunately, all the movies that you are going to have on these channels are not in English. The channels available in the software are not the live ones; they are pre-recorded from the channels around the world and are stored for you to watch them.

They are movies with different languages and not just the English ones. If you have a satellite TV subscription you can just attach a tuner card in your computer to watch your favorite channel in your computer.

Technically, your computer will act as your television. These tuner cards have their own software. To be able for you to watch them, just connect the cable from the receiver going to your tuner card and do a fine tune to get signals from your satellite dish. Most of the time, you don't have to fine tune your tuner card.

The receiver will be one who will give you the satellite signal on your computer. To download software on your QSAT receiver you start by transferring your file from your computer to your USB flash drive and connect it to your receiver.

You could hypothetically do that but it would require purchasing some expensive equipment and the setup would be somewhat complicated. In addition, you need a satellite receiver set top box to receive the satellite signal. You cannot use your computer as a satellite receiver. The easiest way to accomplish what you want is to buy a TV tuner card, tune the tuner card to channel 3 or 4, then attach the satellite receiver to the tuner card.

Or you can purchase a video card that has RCA inputs and hook up the satellite receiver that way. You can convert your PC to a TV, but you cannot convert it into a satellite receiver. And last but not least, and even easier, you can purchase software for 50 bucks that will allow you to tune into hundreds of satellite tv channels vis the internet.

One first hooks up a TV tuner card to their computer and installs the software. Then, one would connect the satellite receiver box's video output to the tuner card. Then, one would turn on the satellite box and open the TV application installed with the capture card's drivers. Dish Network satellite receivers upgrade automatically, usually at night depending on your settings.

You can encourage a software update by making sure the receiver is in "stand by" mode. Wait a few minutes, if a software update is available you will see the message that your receiver is updating.

If not, call Dish Network customer service. Computer software is called either simply software, computer program or it can be called specifically by the computer software's name. First of all click here to download the zip folder containing DCC version 2.

Connection Type must also be chosen. Note: If you know the correct IP address of your box and router, there is an empty space above the Search button. Mouse over there and type the IP address. I click Search.